AEET/CD/6, Electrolytic Uranium Tetrafluoride, S.D. Gokhale, 1962

AEET/CD/13, Studies on the Electrical Properties of Uranium Oxides. I. Electrical Conductivity, A.M. George, 1963

AEET/CD/21, Studies on the Electrical Properties of Uranium `Oxides. II Electrical Conductivity and, Thermoelectric Power of U₃O_8, A.M. George, 1963

AEET/MET-2, Metastable Phases in Uranium Alloys with High, Solute Solubility in the B.C.C. Gamma Phase. Part I: The System U-Nb, K. Tangri, 1964

AEET/MET-3, Metastable Phases in Uranium Alloys with High, Solute Solubility in the B.C.C. Gamma Phase. Part II: The System U-Ru, K. Tangri, 1964

AEET/CD/23, Preparation and Structural Characteristics of Gamma-U₃O₈ - A High Temperature Modification, M.D. Karkhanavaia, 1964

AEET/CD/24, Role of Substrate Symmetry in Gas-Solid Reactions Part I. Reactions of Gaseous Uranium Oxide with, Different Oxides, M D. Karkhanavaia, 1964

AEET/CD/27, Studies of the Electrical Properties of Uranium Oxides III Room Temperature Measurements of the, Hall Coefficients of Alpha and Gamma - U₃O_8, N. Singh, 1964

AEET/CD/33, Studies on the Electrical Properties of Uranium Oxides. IV Nonstoichiometric U₃O_8, N. Singh, 1964

AEET-201, Pilot Plant Production of Nuclear Grade Zirconium Sponge from Indian Zircon, No Author, 1965

AEET-265, Investigations on the Behavior of Plutonium, N. Srinivasan, 1966

BARC-294, Preparation of Plutonium-Beryllium Alloy Neutron Source, P.R. Roy, 1967

BARC-312, Spectrographic Determination of Alloying Elements in Zircaloys, T.S. Krishnan, 1967

BARC-314, Development of High Density and Controlled, Microstructure in Sintered Urania Pellets, V.K. Moorthy, 1967

BARC-319, Preparation of High Density Uranium Monocarbide, Pellets by Reaction Sintering of a Mixture of, Uranium Dicarbide and Uranium Metal, V.K. Moorthy, 1967

BARC-323, Studies on Sintering of Beryllia. Part IV. Mechanism of Sintering During Hot Pressing of Beryllia, V.K. Moorthy, 1968

BARC-346, Kinetics of Sintering of UO_2, V.K. Moorthy, 1968

BARC-396, Recirculating Argon Atmospheric Dry Box for, Handling Pyrophoric and Hydroscopic Materials, D.D. Sood, 1969

BARC-413, Characterization and Sinterability of Urania, Powders

V.K. Moorthy, 1969

BARC-416, The Phase Equilibrium Composition of U₃O₈ and the, O:U Analysis of the Urania Sample, S.R. Dharwadkar, 1969

BARC-422, Chemical Methods of Analysis of Plutonium: A Literature Survey, P.R. Natarajan, 1969

BARC-427, Studies on the Production of Nuclear Grade, Zirconium Sponge from Pure Zirconium Oxide, R.S. Babu, 1969

BARC-500, Determination of the Total Hydrogen Content of UO_2, Pellets, R.K. Bhat, 1970

BARC-507, Studies on the Sintering of UO₂: Relation Between, Electrical Conductivity and Microstructure of Sintered UO_2, S.V.K. Rao, 1970

BARC-568, Studies on Sintering of Nuclear Fuel Materials: Sintering Behavior of Urania-Thoria Mixtures, A. Mohan, 1971

BARC-592, Preparation of Crystal Bar Zirconium by Iodide, Process, C.M. Paul, 1972

BARC-601, Xe-133 Release from Irradiated Thoria Powders at Low Temperatures, M.C. Naik, 1972

BARC-607, Further Studies on the Pilot Plant Production of Reactor Grade Zirconium Sponge, C.V. Sundaram, 1972

BARC-629, Fabrication of Plutonium-Beryllium Neutron Sources, K. Mahajan, 1972

BARC-646, Sintering of Beryllium Oxide: Influence of Minor Additions on Densification and Microstructural Development, R. Bhat, 1972

BARC-670, Molten Salt Chemistry. Part I. Preparation of CeF₃, PuF₃, ThF₄ and Purification of LiF-BeF₂-ThF₄ Mixture, P.N. Iyer, 1973

BARC-671, Molten Salt Chemistry. Part II. Solubility of CeF₃ in Molten LiF-BeF₂-ThF₄ Mixture, P.N. Iyer, 1973

BARC-676, Molten Salt Chemistry. Part III. Solubility of PuF₃ in Molten Mixtures of LiF-BeF₂-ThF₄ and LiF-ThF₄,P.N. Iyer, 1973

BARC-683, Pilot Plant Studies on the Production of Ductile Titanium Sponge from Pure Titanium Tetrachloride, H.S. Ahluwalia, 1973

BARC-718, Damage Diffusion of Xenon in Sintered Thoria Powders, M.C. Nak, 1973

BARC-750, Spectrographic Estimation of Gallium in Plutonium by Carrier Distillation Technique, R.K. Dhumwad, 1974

BARC-772, Controlled Potential Coulometer for the Estimation of Plutonium, M.R. Ponskshe, 1974

BARC-794, Preparation of Copper-Beryllium Alloys from Indian Beryl, C.M. Paul, 1975

BARC-824, Determination of Plutonium-238 in Plutonium by Alpha Spectrometry, S.K. Aggarwal, 1975

BARC-828, Preparation of Hafnium Metal by Calciothermic, Reduction of HfO₂, T.C. Sharma, 1975

BARC-839, Evaluation of Activated Charcoal for Dynamic Adsorption of Krypton and Xenon, A.A. Khan, 1976

BARC-854, Molten Salt Chemistry. Part IV. Solubility Behavior of PuF₂ in Fluoride Salts of Interest in Molten Salt Reactor Technology, V.N. Vaidya, 1976

BARC-859, Krypton-85 Enrichment by Adsorption-Desorption Process, A.A. Khan, 1975

RRC-17, Optical and Electron Micrograph Studies of Two Failed Fillet-Welded Nozzle Joints in a 316L Stainless Cylindrical Tank, D.K. Bhattacharya, 1977

BARC-914, A Comparative Study of Zircaloy and Stainless Steel as Cladding Material for Pressurized Water Reactor, C. Ganguly, 1977

BARC-925, Specification Analysis of Plutonium Fuels: A Potentiometric Method for the Determination of Plutonium, S. Vaidyanathan, 1977

BARC-948, Effect of Impurity Elements Al, Mn, and N₂ on the Corrosion Resistance of Zircaloy-2 in High Temperature Water and Steam, H.S. Gadiyar, 1978

RRC-21, Prediction of Temperature Distribution in a Fast Reactor Spent Fuel Bundle, N.V.L.S. Sarma, 1978

RRC-24, Effect of Steam Cut-Off on Direct Contact Heaters in Series in FBTR Steam Cycle, C. Raju, 1978

RRC-28, A Dynamic Model for the Steam Generator of the Fast Reactor Breeder Test Reactor, S.S. Kumar, 1978

BARC-950, Spectrochemical Determination of Trace Metals in Uranium, T.R. Bangia, 1978

BARC-969, Studies on the Preparation of Thorium Metal Sponge from Thorium Oxalate, P.L. Vijay, 1978

BARC-976, Mass Spectrometric Analysis of Lithium, S.A. Chitambar, 1978

BARC-986, A Passive Gamma Scanner for Estimation of Plutonium in Fabrication Waste, P.P. Venkatesan, 1978

RRC-34, Techniques for Extinguishing Sodium Fires, C. Raju, 1979

RRC-38, Two-Phase (Gas-Liquid) Pressure-Drop Calculations for Flow Through Circular Pipes, G.R. Balasubramanian, 1979

RRC-41, Design and Construction of a High-Tonnage Press for High Static Pressures, K.G. Rajan, 1980

BARC-1041, Precision and Accuracy in the Determination of ²³⁸Pu/²³⁹Pu + ²⁴⁰Pu Alpha Activity Ratio by Alpha, Spectrometry, S.K. Aggarwal, 1980

BARC-1042, Studies on the Treatment of Uranium Mill Effluents, J.L. Kharbanda, 1980

BARC-1043, Oxidation of Zircaloy-4 Under Static Conditions, A.K. Dua, 1980

BARC-1050, Direct Method for the Spectrographic Determination of Hf in U₃O₈ by Carrier-Distillation Technique, R.K. Dhumwad, 1980

BARC-1066, Comparative Study of Stress Corrosion Cracking of Steam Generator Tube Materials in Water at 315 Degrees C, P.K. De,1980

BARC-1075, Studies on the Aqueous Corrosion of Zircaloy-2 Prefilmed by Various Methods, S.V. Hadnis 1980

BARC-1079, Spectrographic Analysis of Thorium and its Compounds, S.V. Grampurohit, 1980

BARC-1080, Hydriding Failure in Water Reactor Fuel Elements, D.N. Sah, 1980

BARC-1087, Kinetics of Interfacial Reaction Between Uranium Dioxide and Zircaloy-2, A.R. Paul, 1980

BARC-1092, Chemistry and Material Compatibility Problems in Dissociating Gas-Cooled Fast Reactors, D.P. Charan, 1981

RRC-50, Interpretations of Pin/Plate Sodium/Void Reactivity Measurements, S. Ganesan, 1981

BARC-1135, Irradiation-Induced Embrittlement of Steels Used as Reactor-Pressure Vessel and End Shields, S. Chaterjee, 1981

BARC-1140, O/M Variations in Uranium Oxides by X-Ray Diffractometry, S. Sampath, 1981

RRC-52, Spectrophotometric Determination of Uranium and Thorium, K. Rajamoorthi, 1982

RRC-53, Fuel-Cladding Chemical Interaction in Mixed Oxide Liquid Metal Fast Breeder Reactors: A Review, A.S. Khanna,1982

BARC-1171, Thermophysical Properties of ThO₂ and Mixed ThUO₂, A.C. Momin, 1982

BARC-1178, Separation and Determination of Gadolinium in Uranium Samples by Spectrophotometry, M. Venkatesan, 1982

BARC-1188, Development of a Dried Recycling Route for Rejected UO₂ and UO₂-4 wt% PuO₂ Sintered Pellets, P.R. Roy, 1982

BARC-1191, Thermodynamic Data of Binary Metallic Alloys, S. Bharadwaj, 1983

BARC-1197, Analytical Methods for the Determination of Boron in Reactor Materials Program, R.S. Chitre, 1983

BARC-1203, Fabrication of MOX Fuel Element Clusters for Irradiation in PWL, CIRUS, P.R. Roy, 1983

BARC-1237, Irradiation Embrittlement of Reactor Pressure Vessel Steels, K.S. Sivaramakrishnan, 1984

BARC-1238, Purification Process for an Inert Gas System, S.S. Raj, 1984

RRC-63, Heat to Heat Variations in the Creep Rupture Strength of a Modified AISI 316 Grade Stainless Steel, M.D. Mathew, 1984

RRC-64, Modified Metallographic Method to Detect Sensitization in Austenitic Stainless Steels, N. Paravathavarthini, 1984

RRC-65, First Integrated Leakage Rate Report of FBTR Containment Structure, R.P. Kapoor, 1984

RRC-66, Thermal Design Calculation of Sodium Heated Once- Through Steam Generators, A.L. Kothandaraman, 1984

RRC-70, Dynamic Model of FBTR Steam/Water System, A. Rajakumar, 1984

BARC-1251, Corrosion Inhibitors for Carbon Steel Surfaces in Contact with Fresh Water, K.M. Abubacker, 1985

BARC-1276, Environment Induced Cracking of Zircaloy-2 Fuel Cladding Tube, S.K. Ghosal, 1985

BARC/I-828, Development of a Suitable Cleaning Formulation and Actual Cleaning Chemical Cleaning Operations of Uranium Melting Furnance Top Covers in Atomic Fuels Division, P.K. Mathur, 1985

BARC/I-836, Europium Hexaboride: A Case Study of Control Material for Fast Breeder Reactor, D.Goswami, 1985

BARC-1386, Migration of Cerium in Mixed (Th,Ce) Oxides Under Temperature Gradient, A.R. Paul, 1987

BARC-1438, Radiolytic Generation of Gases in Reactors, V. Ramshesh, 1988

BARC-1450, Method of Surface Area Measurement of Fuel Materials by Fission Gas Release at Low Temperature, K.N.G. Kaimal, 1989

BARC-1456, Report on Stress Analysis of Seal Disc of 235 MWe PHWR, D.S. Chawla, 1989

BARC-1478, Computer Programs for Data Reduction and Interpretation in Plutonium and Uranium Analysis by Gamma Ray Spectrometry, R.K. Singh, 1989

BARC/I-947, Amenability of Uranium Ores to Wet High Intensity Magnetic Separation, R.S. Jha, 1989

FCD/NUMAC/3/89, Time Series Analysis of the Monthly Production Data of Uranium at UCIL (March 1975 to Dec. 1988 and Forecasting the Monthly Production Up to 1995, M.B. Yadav, 1990

BARC-1518, Plutonium Estimation in the Process Solutions and Oxide Dissolved Audit Samplers by Potentiometry, Using Memo Titrator, K. Kumaraguru, 1990

BARC-1541, Bibliography of Transuranium Elements, D.D. Sood, 1991

BARC-1991/E/015, Development of Neutron Well Coincidence Counters for Plutonium Assay and Neutron Multiplicity Studies, S.P. Dange, 1991

BARC-1991/E/017, Pulsed Laser Photoacoustic Spectrometer for Study of Solid Materials, N.D. Patel, 1991

BARC-1992/E/003, Laser Based Analytical Spectroscopy of Uranium, A.A. Argekar, 1992

BARC-1992/E/016, Assessment of the Waterside Corrosion and, Hydrogen Pick-Up in the Zircaloy-2 Pressure Tubes of PHWR, D.N. Sah, 1992

BARC-1993/E/026, Structural Analysis of Steam Generator Internals Following Feed Water Steam Line Break: DLF Approach, U. Bhasin,1993

BARC-1993/E/033, The Stress Analysis of Feeder Pipe Coupling of 500 MWe PHWR, D.S. Chawla, 1993

BARC-1993/E/036, Ultimate Load Capacity Assessment of Reinforced Concrete Shell Structures, A. Gupta,1993

BARC-1994/E/010, Development of AUC-Based Process at BARC for Production of Free-Flowing and Sinterable UO₂ Powder, V.S. Keni, 1994

Proceedings of a Symposium on Analytical Methods in Nuclear Fuel Cycle, 1971, Vienna, Austria, N. Srinivasan, Analysis of Plutonium Oxide

Proceedings of the Symposium on Materials Research, Hyderabad, India, 1972, J.B. Gnanamoorthy, High Temperature Materials for Sodium Cooled Fast Breeder Reactors. A Review of Their Compatability Problems

Proceedings of the Symposium on Materials Research, Hyderabad, India, 1972, H.S. Gadiyar, Oxidation Characteristics of Zirconium and Zircaloy-2 in Oxygen Between 450-750 Degrees C

Thermodynamics of Nuclear Materials 1974, Vienna, Austria, 1974, D.D. Sood, Solubility of PuF₃ in Fluoride Salt Mixtures of Interest in Molten Salt Reactor Technology

Phas Transformations and Phase Equilibria, Bagalore, India, 1975, S.V. Phadnis, Relation Between Phase Changes in the Oxide and the Transition Phenomena During Oxidation of Zirconium Alloys

2nd Annual Conference of Powder Metallurgy Association of India, 1976, T.S. Krishnan, Ductile Zirconium Powder by Hydride-Dehydride Process

Proc. Symp. Struct. Prop. Correl. Instrum. Tech. Mater. Res., 1977, p343-53, P.R. Roy, Quantitative Phase Analysis in Zirconium Oxide-Calcium Oxide System by X-ray Diffraction

International Conference on Beryllium, 1977, London, UK, K.S. Subbarao, Beryllium Development Programme in India

Proceedings of the International Symposium on Nuclear Materials, 1979, Julich, Germany, P. Rajendra, Thermodynamics of the Vaporization of Thorium and Uranium Halides

Prepr. - Int. Conf. Adv. Chem. Metallurgy, 1979, Paper 28

P.R. Roy, Metallo- and Carbothermic Reductions in the Preparation of Plutonium Metal, its Alloys and Compounds

Proc. Symp. Sintering Sintered Prod., 1979, p247-54, U.D. Kulkarni, A Computer Approach Towards Sintering Characterization of Uranium Dioxide Powders

Proc. Symp. Sintering Sintered Prod., 1979, p343-56, M.S. Visweswaraiah, Recent Studies in the Preparation of Ceramic Grade Uranium Dioxide

Proc. Symp. Sintering Sintered Prod., 1979, p375-86, P.P. Rajagopalan, Effect of Precompaction on Sintered Uranium Dioxide Pellets

Proc. Symp. Sintering Sintered Prod., 1979, p387-400, C.B. Rao, Steady State Behavior of Gaseous Fission Products in Uranium Dioxide Nuclear Fuel at Low Temperature

Proc. Symp. Sintering Sintered Prod., 1979, p423-41, C. Ganguly, Powder Metallurgy in the Fabrication of (Uranium-Plutonium) Carbide, (Uranium-Plutonium) Nitride, and (Uranium-Plutonium) Carbonitride Fuels for Fast Breeder Reactors

Proc. Symp. Sintering Sintered Prod., 1979, p455-71, R. Ramachandran, Factors Affecting the Sintered Density of Plutonium Oxide

Proc. Symp. Sintering Sintered Prod., 1979, p473-80, N.C. Jayadevan, The Interaction of Cesium with Sintered Uranium-Plutonium Oxides

International Symposium on Thermodynamics of Nuclear Materials, 1979, J.M. Juneja, Investigation of the Silicothermic Reduction of Uranium Fluorides

DAE Symp. on Nuclear Chemistry and Radiochemistry, 1981, C. Ganguly, Carbon, Nitrogen, Oxygen, and Hydrogen Analysis for Plutonium Bearing Nuclear Fuels

Workshop Water Chem. Therm. Power Stn., 1983, p67-79, T.B. Nandwani, Condensate Polishing

Proceedings of the Third International School on Sintered Materials, 1983, New Delhi, India, A. Mohan, Effect of Crystallinity on Sintering Mechanisms of UO₂

Symposium on Metallothermic Processes in Metal and Alloy Extraction, Nagpur, India, 1983, R.N. Arya, Material Selection and Equipment Design for Metallothermic Processes

Proceedings of the National Conference on Progress in Metallurgical Fundamental and Applied Aspects, Kanpur, 1985, V.D. Shah, Halide Metallurgy in Beryllium Extraction

Proc. 11th World Conf. on NDT, 1985, J.K. Ghosh, A Combined X-Radiography-Gamma Autoradiography (XGAR) Technique for Characterization of Welded Fuel Pins

Proceedings, 11th International Plansee Seminar, 1985, J.C. Sehra, Electro-Metallurgical Processes for Recycling of Zircaloy Scrap

Improvements in Water Reactor Fuel Technology and Utilization, 1986, p557, H.S. Kamath, Studies of New Fabrication Techniques for UO₂ and Mixed Oxide Fuel for Improved Performance and Economics

Zirconium in the Nuclear Industry: Seventh International Symposium, ASTM-STP-939, 1987, p136-45, S. Chintamani, Recycling Off-Grade Zircaloy Scrap Using a Molten-Salt Electro-Refining Process

Fourth International Conference on Powder Metallurgy and Related High Temperature Materials, 1987, P. Balakrishna, Activated Sintering of Thoria

Indo-US Workshops on Solidification Principles and Materials Processing, Hyderabad, India, 1988, G.K. Dey, Microstructure of Melt Spun Inconel 600 and Inconel 625

National Symposium on Uranium Technology, Bombay, 1989, B. Venkataramani, Novel Surface Treatment to Improve the Quality of Sintered UO₂ Pellets

National Symposium on Uranium Technology, Bombay, 1989, R. Natarajan, Improved Gravity Flow-Sheet for the Recovery of Uranium Values from the Copper Plant Tailings

National Symposium on Uranium Technology, Bombay, 1989, R.S. Jha, Magnetic Separation for Preconcentration of Uranium Values from Copper Plant Tailings

National Symposium on Uranium Technology, Bombay, 1989, N.P.H. Padmanabhan, Preliminary Beneficiation Studies on Uranium Ore from Tummalapalle, Andhra Pradesh

Symposium on Uranium Technology, Bombay, 1989, S.V. Parab, Nuclear Pure Uranium from Ores Using Weak Base Ion Exchange Process

Symposium on Uranium Technology, Bombay, 1989, R.A. Nagle, Development of an Integrated Process for Recovery of Uranium from Ore and Its Refining at the Location of New Uranium Mill at Tiramdih

Symposium on Uranium Technology, Bombay, 1989, R.A. Nagle, Recovery of Uranium from Nitro-Phosphoric Acid

Symposium on Uranium Technology, Bombay, 1989, D.V.Jayant, Recovery of Uranium from Seawater

Symposium on Uranium Technology, Bombay, 1989, H. Singh, Operating Experience in the Refining of Uranium by Solvent Extraction Using Mixed-Settlers

Symposium on Uranium Technology, Bombay, 1989, V.N. Krishnan, Studies on Preparation and Characterization of Ammonium Uranyl Carbonate (AUC)

Symposium on Uranium Technology, Bombay, 1989, S.R. Ramachandran, Preparation of Metal Grade Uranium Trioxide Through Ammonium Diuranate Precipitation Process

Symposium on Uranium Technology, Bombay, 1989, A.M. Menghal, Improvements in Process Technology for Uranium Metal production at UMP

Symposium on Uranium Technology, Bombay, 1989, A.V. Vedak, Improvements in Equipment Design for Hydrofluorination of UO₂ to UF₄

Symposium on Post Irradiation Examination in Nuclear Programme, Bombay, 1989, K.N.G. Kaimal, Post Irradiation Release Measurement of Gaseous Fission Products at Low Temperatures and Estimation of Surface Area of Nuclear Fuel Materials

Sixth International Conference on Water Chemistry of Nuclear Reactor Systems, London, 1989, S. Rangaarajan, An Overview of High Temperature - High Pressure pH and Potential Calculations - A Critical Evaluation

International Symposium on Thermochemistry and Chemical Processes, Kalpakkam, 1989, M.M. Charyulu, Recovery, Purification and Conversion of Plutonium from Fuel Fabrication Scrap Using Marcoporous Anion Exchange Process

4th National Symposium on Thermal Analysis, Srinagar, 1989, S.K. Mukerjee, Kinetic Study of the Carbothermic Synthesis of Uranium Mono Carbide Microspheres

4th National Symposium on Thermal Analysis, Srinagar, 1989, S.K. Mukerjee, Kinetics of Carbothermic Synthesis of UN Microspheres

Symposium on Advanced remote handling Systems and Automation in Nuclear Installations, Bombay, India, 1990, J.S. nair, Automated Safety Interlocks in a Beryllium Pilot Plant

Annual Conference of Indian Aerosol Science and Technology Association, Bombay, India, 1991, D.D. Thorat, Particle Size Distribution Studies Within a Beryllium Processing Plant

Zirconium in the Nuclear Industry: Ninth International Symposium, ASTM-STP-1132, 1991, p48-61, J.K. Chakravarty, Processing Map and Hot Working Characteristics of Zircaloy-2

Third International Conference on CANDU Fuel, 1992, p5/1-10, C.S. Viswanadham, An Analysis of the Fuel Temperature History and Microstructure of an Irradiated PHWR Fuel Element by Computer Modeling and Post-Irradiation Examination

Journal of Nuclear Materials, 1975, Vol. 58, p25-30, R.P. Agarwala, Diffusion of Carbon in Zirconium and Some of Its Alloys

Journal of Nuclear Materials, 1975, Vol. 58, 205-10, A.R. Paul, Mass Transport of Chromium and Nickel in Monel-400

Nuclear Technology, 1975, Vol. 27, p411-15, D.D. Sood, Plutonium Trifluoride as a Fuel for Molten Salt Reactors - Solubility Studies

Transactions of the Society for Advancement of Electrochemical Science and Technology, 1976, Vol. 11, p43-62, K. Elayaperumal, Some Basic Studies on Corrosion of Metals and Alloys of Interest to Atomic Energy Programmes

Transactions of the Indian Institute of Metals, 1976, p213, N. Saratchandran, Reclamation of Off-Grade Zircaloy Mill-Scrap

Radiation Effects, 1976, Vol. 28, p235-9, M.C. Naik, Damage Diffusion of Xe-125 and Kr-85 in Thoria

Indian Journal of Technology, 1976, Vol. 14, p242-5, H.S. Gadiyar, Role of Oxide Plasticity in the Oxidation Behavior of Zirconium Alloys

Journal of Nuclear Materials, 1977, Vol. 71, p105-9, M.C. Naik, Release of Iodine from Sintered Thoria Pellets at Low Temperatures

Journal of Nuclear Materials, 1977, Vol. 67, p239-43, M.C. Naik, Release of Xenon from Low-Dose Irradiated Thoria Pellets

Journal of Nuclear Materials, 1978, Vol. 74, p19-26, I.G. Sharma, Studies on Electrorefining of Calciothermic Hafnium

Journal of Nuclear Materials, 1978, Vol. 74, p297-302, A.K. Suri, Studies on the Fabrication of Aluminum Bonded Boron Carbide Rings

Journal of Chemical Thermodynamics, 1979, Vol. 11, p31-6, Z. Singh, Thermodynamics of the Vaporisation of Thorium Tetrachloride

Radiochemical Radioanalytical Letters, 1980, Vol. 45, p73-85, S.K. Aggarwal, Determination of Americium-241 in Plutonium

Trans. Powder Metallurgy Assoc. India, 1980, Vol. 7, p22-30, C. Ganguly, Studies on the Preparation and Sintering of Uranium-Plutonium Mixed Mononitride at BARC

Trans. Powder Metallurgy Assoc. India, 1980, Vol. 7, p40-51, C. Ganguly, Sintering Behavior of Plutonium-Rich (Uranium-Plutonium) Carbide and (Uranium-Plutonium) Carbonitride Pellets

Trans. Powder Metallurgy Assoc. India, 1980, Vol. 7, p52-6, R. Ramachandran, Press Tooling for Mixed Oxide Compaction in Glove Boxes

Corrosion, 1980, Vol. 36, p306-12, H.S. Gadiyar, Corrosion and Magnetite Growth on Carbon Steels in Water at 310C - Effect of Dissolved Oxygen, pH, and EDTA Addition

Scripta Metallurgia, 1980, Vol. 14, p311-16, J.I. Dickson, Yield Points Obtained by Aging at Two Stresses in Titanium, Zirconium and Zircaloy-2

Journal of Chemical Thermodynamics, 1980, Vol. 12, p329-33, K. Nagarajan, Vaporization Behavior of Uranium Tetrafluoride

Corrosion, 1980, Vol. 36, p433-6, R.K. Dayal, A Study of Various Critical Pitting Potentials for Type 316 Stainless Steel in Sulfuric Acid Containing Chloride Ions

Journal of Nuclear Materials, 1981, Vol. 96, p57-63, M.C. Naik, Migration and Trapping of Fission Xenon in Urania-Doped Thoria

Trans. Powder Metallurgy Assoc. India, 1981, Vol. 8, p78-82, R. Ramachandran, Some Observations in the Sintering of Uranium Plutonium Oxide (U_0.25Pu_0.75)O₂ Compacts

Journal of Chemical Thermodynamics, 1981, Vol. 13, p485-90, Z. Singh, Thermodynamics of the Vaporization of Uranium Tetrabromide

Metallurgical Transactions, 1981, Vol. 12, p1089-97, R. Raj, Development of a Processing Map for Use in Warm-Forming and Hot-Forming Processes

Res Mechanica Letters, 1981, Vol. 1, p307-14, K.S. Venkateswarlu, Pellet-Cladding Interactions: Detection and Location of PCI Defects Through Fission Product Release During Reactor Operation/Transients and the Concept of Cumulative PCI Damage

Journal of Vacuum Science and Technology, 1982, Vol. 21, p994-8, A.K. Sharma, Effect of Glow Discharge Treatment of Substrates on Parylene-Substrate Adhesion

International Journal of Refractory & Hard Metals, 1982, Vol. 1, p20-5, D.K. Bose, On the Preparation of Metal Powders

Transactions of the Indian Institute of Metals, 1982, Vol. 35, p143-7, P.L. Vijay, Preparation of Thorium Metal Sponge from Thorium Oxalate

Oxidation of Metals, 1982, Vol. 18, p315-30, A.S. Khanna, Postbreakaway Oxidation Kinetics of Two Ferritic Steels

Journal of Chemical Thermodynamics, 1982, Vol. 14, p389-94, K.N. Roy, Studies on (2UF₄ + H₂ = 2UF₃ + 2HF) and Vapor Pressure of UF₃

Transactions of the Indian Institute of Metals, 1982, Vol. 35, p494-6, A.S. Khanna, Oxidation of 21/4 Cr-1Mo Steel in Oxygen, Oxygen-Water Vapor Mixture at High Temperature

Journal of the Electrochemical Society of India, 1983, Vol. 32, p41-6, S.V. Phadnis, Ellipsometric Evaluation of various Pretreatments on Zircaloy-2

Transactions of the Indian Institute of Metals, 1983, Vol. 36, p246-9, R. Prasad, High Temperature Studies on UF₄/UF₃ System

NDT International, 1983, Vol. 16, p275-6, J.K. Ghosh, Monitoring Plutonium Enrichment in Mixed-Oxide Fuel Pellets Inside Sealed Nuclear Fuel Pins by Neutron Radiography

Journal of Nuclear Materials, 1983, Vol. 119, p333-8, A.R. Paul, The Release of Fission-Recoiled Xenon from Zircaloy-2

Indian Journal of Technology, 1983, Vol. 21, p259-64, S.V. Phadnis, Interaction Between Zirconium Alloys and Steam in the Temperature Range 400-950 Degrees C

Trans. Powder Metallurgy Assoc. India, 1984, Vol. 11, p51-5, C. Ganguly, Development of a Binder for Fabrication of Uranium Carbide and Uranium Plutonium Carbide (U_0.3Pu_0.7)C Sintered Pellets

Trans. Powder Metallurgy Assoc. India, 1984, Vol. 11, p56-61, P. Balakrishna, Low Density Phenomena in Sintered Urania

Trans. Powder Metallurgy Assoc. India, 1984, Vol. 11, p119-22, D.D. Upadhyaya, Application of Positron Annihilation Techniques in the Field of Ceramics

Indian Journal of Marine Sciences, 1984, Vol. 13, p142-3, B.K. Sabu, Heavy Minerals in Beach Sands of Chatrapur (Orisa), East Coast of India

NDT International, 1984, Vol. 17, p269-71, J.K. Ghosh, Use of Autoradiography for Checking Plutonium Enrichment and Agglomerates in Mixed-Oxide Fuel Pellets Inside Welded Fuel Pins

Journal of Materials Science Letters, 1984, Vol. 3, p835-6, J.P. Panakkal, Ultrasonic Velocity in Sintered Uranium Dioxide Pellets

Journal of Nuclear materials, 1984, Vol. 126, p1-8, S.K. Mannan, Influence of Deformation on Sensitization Kinetics and its Microstructural Correlation in a Nuclear Grade 316 Stainless Steel

Bulletin of Material Science, 1984, Vol. 6, p923-58, P.R. Roy, Plutonium Metallurgy in India

Current Science, 1984, Vol. 53, p1173-9, C.K. Mathews, Basic Research in Chemistry Related to Fast Breeder Reactor Technology

Oxidation of Metals, 1985, Vol. 23, p17-33, A.S. Khanna, Effect of Cold Work on the Oxidation Resistance of 21/4 Cr-1Mo Steel

Bulletin of Materials Science, 1985, Vol. 7, p21-30, R. Verma, X-Ray Diffraction Study of Cation Interdiffusion in Mixed UO₂-PuO₂ Compacts

Transactions of the Indian Institute of Metals, 1985, Vol. 38, p147-52, A.S. Khanna, Continuous Corrosion Measurement of 21/4 Cr-1Mo Steel in Steam Using a Special Atmosphere Furnace

Oxidation of Metals, 1985, Vol. 23, p159-76, A.S. Khanna, Detection of Breakaway Oxidation and Spalling in the Oxide Scales of 21/4 Cr-1Mo Steels Using Acoustic Emission Technique

British Journal of Non-Destructive Testing, 1985, Vol. 27, p232-3, J.P. Panakkal, Characterization of Uranium-Plutonium Mixed Oxide Fuel Pins, Using Neutron Radiography

Pramana, 1985, Vol. 24, p259-78, P.K. Iyengar, Perspectives in Neutron Physics Research

Pramana, 1985, Vol. 24, p361-81, K. Krishan, Radiation-Induced Structural Changes in Alloys

Pramana, 1985, Vol. 24, p397-421, P.R. Roy, Irradiation Behavior of Nuclear Fuels

Trans. Powder Metallurgy Assoc. India, 1985, Vol. 12, p39-53, R.S. Mehrotra, Analysis of Vacuum Carbothermic Reduction of Uranium Dioxide by Isothermal TGA Technique

Journal of Testing and Evaluation, 1986, Vol. 14, p3-6, N. Parvathavarthini, A Modified Metallographic Method to Direct Sensitization in Type 316 Stainless Steel

Journal of Nuclear Materials, 1986, Vol. 139, p91-6, A.M. Azad, An Approach for the Prediction of Temperature Dependence of Sonic Velocity: Application to Liquid Alkali Metals and Molten UO₂

Tool Alloy Steels, 1986, Vol. 20, p97-106, P.R. Roy, Stainless Steels for Nuclear Industries

Tool Alloy Steels, 1986, Vol. 20, p113-16, R. Prabhudoss, Alloy Steel for Valve Components

Praktische Metallogrographie, 1986, Vol. 23, p163-74, C. Ganguly, Microstructure of Gel-Pelletized Thorium Dioxide-Uranium Dioxide

Journal of the Electrochemical Society of India, 1986, Vol. 35, p193-6, K.B. Gaonkar, Oxidation and Corrosion Behavior of Magnetite Coated Carbon Steel After Chemical Cleaning

Oxidation of Metals, 1986, Vol. 26, p263-73, B.B. Jha, Frequency Analysis of AE Signal Obtained During Breakaway Oxidation and Internal Cracking of 21/4 Cr-1Mo Steel at 900 Degrees C

Journal of Nuclear Materials, 1986, Vol. 139, p282-3, A.K. Sengupta, Thermal Conductivity of Sintered Plutonium Carbide

Nuclear Instruments and Methods in Physics Research, Section B, 1986, Vol. B14, p310-13, J.P. Panakkal, Analysis of Optical Density Data Generated from Neutron Radiographs of Uranium-Plutonium Mixed Oxide Fuel Pellets Inside Sealed Nuclear Fuel Pins

Bulletin of Materials Science, 1986, Vol. 8, p479-88, R. Verma, Determination of Oxygen to Metal Ratio of U-Pu Mixed Oxides by X-Ray Diffraction

Proceedings of the Indian Academy of Sciences, Chemical Sciences, 1986, Vol. 97, p495-511, J.B. Gnanamoorthy, Corrosion of Austenitic Stainless Steels in Aqueous Environments

Journal of Applied Physics, 1986, Vol. 59, p902-4, P. Radhakrishnan, Laser-Induced Damage to Spray Pyrolysis Deposited Transparent Conducting Films

American Ceramic Society Bulletin, 1986, Vol. 65, p1057-60, A.K. Sengupta, Determination of Some Important Thermophysical Properties of (U_0.3Pu_0.7) C Fuel

Werkstoffe und Korrosion, 1986, Vol. 37, p637-43, U.K. Mudali, Influence of Nitrogen Addition on Microstructure and Pitting Corrosion Resistance of Austenitic Weld Metals

Nuclear Technology, 1987, Vol. 78, p69-74, K. Chandler, Direct Dissolution of Nuclear Material for Chemical Quality Control

Transactions of the Indian Institute of Metals, 1987, Vol 40, p74-6, R.K. Dayal, Influence of Grain Size on Crevice Corrosion of Austenitic Stainless Steels

Transactions of the Indian Institute of Metals, 1987, Vol 40, p176-8, B.B. Jha, Characterization of Frequency Spectrum of Acoustic Emission Signals Obtained During Oxidation of Ferritic Steel

Corrosion, 1987, Vol. 43, p140-8, G.C. Palit, Pitting Corrosion of Zirconium in Chloride Solutions

Material Science Letters, 1987, Vol. 6, p260-2, T.R.G. Kutty, Fracture Toughness and Fracture Surface Energy of Sintered Uranium Dioxide Fuel Pellets

Metallography, 1987, Vol. 20, p1-14, C. Ganguly, Characterization of Uranium Cerium Oxide, Pellets Prepared by the Sol-Gel Microsphere Pelletization Process

Journal of Nuclear Materials, 1987, Vol. 149, p277-82, A.R. Paul, Mass Transport of Cobalt and Copper in Monel-400

High Temperatures - High Pressures, 1987, Vol. 19, p509-12, A.K. Sengupta, Thermal Conductivity of Titania-Doped UO₂/-4%PuO₂

Journal of Materials Science, 1987, Vol. 22, p2823-7, B.B. Jha, Study of the Oxidation Behavior of 9 Cr-1 Mo Steel Using the Acoustic Emission Technique

Journal of Nuclear Material, 1988, Vol. 151, p293-300, A.M. Azad, Direct measurement of Thermodynamic Activities of Metals in an AISI 304 Stainless Steel by calcium Fluoride EMF Technique

Journal of Nuclear Material, 1988, Vol. 153, p82-5, J.P. Panakkal, A Simple Method for Neutron Radiography of Uranium-Plutonium Mixed Oxide Fuel Pins

Journal of Nuclear Materials, 1988, Vol. 160, p88-94, P. Balakrishna, Thorium Oxide: Calcination, Compaction and Sintering

British Journal of Non-Destructive Testing, 1988, Vol. 30, p 170-1, K.N. Chandrasekharan, Quantitative Assessment of Beam Effects in Radiography of Nuclear Fuel Plates and its Removal by Digital Image Processing

Sadhana, 1988, Vol. 13, p139-56, J. Karthikeyan, Ceramic Coating Technology

Journal of Nuclear Material, 1988, Vol. 158, p159-65, C. Ganguly, Out-of-Pile Chemical Compatibility of Hyperstoichiometric Plutonium Uranium Carbide (Pu_0.7U_0.3)C with Stainless Steel Cladding and Sodium Coolant

Journal of the Electrochemical Society of India, 1988, Vol. 37, p181-3, D. Mukherjee, Oxidation Resistance of Alloys

Bulletin of Material Science, 1988, Vol. 11, p213-24, G.L. Goswami, Laser Material Processing

Oxidation of Metals, 1988, Vol. 30, p345-59, R.K.S. Raman, Effect of Tempering Time on the Oxidation Behavior of 21/4 Cr-1Mo Steel

Bulletin of Materials Science, 1988, Vol. 10, p403-410, T.K.S. Murthy, Mineral Processing in the Indian Nuclear Energy Programme

Journal of Material Science Letters, 1988, Vol. 8, p449-50, U. Basak, Hot Hardness and Thermal Conductivity of ThO₂/PuO₂ and ThO₂/UO₂ Sintered Pellets

Corrosion, 1988, Vol. 44, p511-6, T.P.S. Gill, Effect of heat Input and Microstructure on Pitting Corrosion in AISI 316L Submerged Arc Welds

Journal of Material Science Letters, 1988, Vol. 7, p657-60, P. Balakrishna, Low-Temperature Sintering of Thoria

Journal of Nuclear Materials, 1988, Vol. 160, p166-71, A.R. Paul, The Release of Fission-Recoiled Xenon from Zr-2.5 wt.% Nb Alloy

Scripta Metallurgica, 1988, Vol. 22, p1395-8, K. Bhanumurthy, Metallic Glass Formation by Solid State Reaction in Bulk Zirconium-Copper Diffusion Couples

Journal of Nuclear Materials, 1989, Vol. 161, p44-56, D. Srivastava, Thermodynamic Analysis of Mixed Carbide, Carbonitride and Nitride Fuels for Fast Breeder Reactors

Journal of Nuclear Materials, 1989, Vol. 161, p89, B.S. Mathur, Direct Conversion of Uranium Tetrafluoride to Uranium Dioxide

Key Engineering Materials, 1989, Vol. 29, p159-69, D.D. Upadhyaya, Ceramics Fabrication by Injection Moulding Technique - Selection of Materials and Fabrication Experience

Key Engineering Materials, 1989, Vol. 38, p. 133-41, G.K. Dey, Rapid Solidification of Some Nickel Based Alloys

Materials Science and Engineering A, 1989, Vol. A119, p175-84, G.K. Dey, Microstructural Studies on Rapidly Solidified Inconel 625

Journal of Fluorine Chemistry, 1989, Vol. 44, p177-, B.N. Wani, Fluorination of Oxides of Uranium and Thorium by Ammonium Hydrogen Fluoride

Journal of the Less-Common Metals, 1989, Vol. 146, p161-6, P.N. Iyer, Double Sulphates of Plutonium (III) and Lanthanides with Sodium

Nuclear Technology, 1989, Vol. 84, p196-204, A.A. Argekar, Trace Metal Characterization of the U-Al Matrix by Atomic Spectroscopy

Key Engineering Materials, 1989, Vol. 38, p201-15, G.K. Dey, Glass Formation and Crystallization in Some Zr Based Binary and Ternary Alloys

Key Engineering Materials, 1989, Vol. 38, p233-44, E.G. Bahuraj, Comparison of Crystalline Phases Present in Alloy Ingots, Partially Crystalline Alloys and Crystallization Products of Amorphous Alloys

Journal of Materials Science Letters, 1989, Vol. 8, p277-8, R.K.S. Raman, Grain Size Effect on the Oxidation Behavior of 214Cr-1 Mo Steel

Bulletin of Materials Science, 1989, Vol. 12, p381-405, C. K. Gupta, Process Technology - Rare and Refractory Metals

Bulletin of Materials Science, 1989, Vol. 12, p407-34, R. Mallikarjunan, Pyrometallurgical Process for the Separation of Hafnium from Zirconium

Journal of Material Science Letters, 1989, Vol. 8, p449-50, U. Basak, Hot Hardness and Thermal Conductivity of Thorium Dioxide-Plutonium Dioxide and Thorium Dioxide-Uranium Dioxide Sintered Pellets

Thermal Conductivity, 1989, Vol. 20, p153-62, A.K. Sengupta, Thermal Conductivity Measurements of Ceramic Nuclear Fuels by Laser Flash Method

Journal of Nuclear Materials, 1989, Vol. 165, p179-83, K. Bhanumurthy, Diffusion Reaction in the Zircaloy-2/Titanium System

Journal of Nuclear Materials, 1989, Vol. 168, K.N.G. Kaimal, Temperature Dependence of Diffusivity of Xenon in High-Dose Irradiated UO₂

Physica B, 1989, Vol. 156, p534-6, Y.D. Dande, Neutron Instrumentation for DHRUVA Utilization

Key Engineering Materials, 1989, Vol. 29-31, p669-76, P. Balakrishna, Activated Sintering of Thoria

Materials Transactions, JIM, 1989, Vol. 30, p707-16, A.U. Malik, Influence of carbon on the Hot Corrosion Behavior of Fe-Based Alloys

Corrosion Science, 1989, Vol. 29, p823-31, G.K. Dey, Corrosion Studies on Amorphous and Crystalline Zr₆₇Ni₃₃

Nuclear Technology, 1989, Vol. 85, p136-46, D.N. Sah, Electron Probe Microanalysis and Scanning Electron Microscopy of Deposits on the Inner Surface of Boiling Water Reactor Cladding

Journal of Materials Science Letters, 1989, Vol. 8, p277-8, R.K. S. Raman, Grain Size Effect on the Oxidation Behavior of 21/4 Cr-1Mo Steel

Pramana, 1989, Vol. 32, p289-97, K. Bhanumurthy, On the Formation of Amorphous Layers by Interdiffusion in Zirconium-Copper System

Indian Journal of Chemistry, 1989, Vol. 28A, p977-79, M.S. Gill, Volatile Compounds of B-Diketonates of Uranium (IV) with Tetrahydrofuran and Dimethoxyethane

Journal of Nuclear Material, 1990, Vol. 172, p37-46, S. K. Mukerjee, Kinetic Study of the Carbothermic Synthesis of Uranium Monocarbide Microspheres

Journal of Nuclear Material, 1990, Vol. 172, p114-22, G.P. Tiwari, Effect of Temperature on the Growth of Inert Gas Bubbles in Metals

Journal of Nuclear Material, 1990, Vol. 172, p135-7, J.P. Panakkal, Longitudinal Ultrasonic Velocity in Plutonium-Uranium Carbide (_0.7Pu-_0.3U)C Pellets

Trans. Powder Metallurgy Assoc. India, 1990, Vol. 17, p49-54, R.S. Mehrotra, Parametric Study of the Kinetics of Vacuum Carbothermic Reduction of Uranium Dioxide

Fiz. Khim. Obrab. Mater., 1990, p106-12, G.L. Goswami, Welding of Fittings for Heavy-Water Reactors Operating Under Pressure. Laser as an Alternative

Fiz. Khim. Obrab. Mater., 1990, p113-19, G.L. Goswami, Characteristics of Welds Obtained in Welding of Alloy Zircaloy-2 with a Laser Beam

Journal of Materials Engineering, 1990, Vol. 12, p227-34, U.K. Mudali, Intergrannular Corrosion Studies on Warm Worked Type 316 Austenitic Stainless Steel

Vacuum, 1990, Vol. 40, p275-80, S.P. Garg, Zr Powder and Zr-16% Al Alloy as Getters for O₂, H₂, H₂O, CO and CO₂ Gases

Met. Material Processes, 1990, Vol. 1, p293-300, K.N.G. Kaimal, Effect of Irradiation and Dopant Concentration on the Migration of Xenon in Uranium Dioxide

Journal of Material Science Letters, 1990, Vol. 9, p353-4, A.S. Khanna, Influence of Variation in Grain Size on the Oxidation Behavior of Low-Chromium Steels Vis-a-Vis That of High-Chromium Steels

Bulletin of Materials Science, 1990, Vol. 13, p365-69, D.S. Mungekar, A Laboratory Design for Uniaxial Hot Pressing

Indian Journal of Technology, 1990, Vol. 28, p435-51, Y.V.R.K. Prasad, Recent Advances in the Science of Mechanical Processing

Corrosion, 1990, Vol. 46, p454-60, U.K. Mudali, Pitting Corrosion Resistance of Nitrogen-Added Type 304 Stainless Steel Weld Metal With Different Heat Inputs

Journal of Materials Science, 1990, Vol. 25, p455-8, T.R.G. Kutty, Indentation Fatigue of Ceramic Nuclear Fuels

Materials Science and Technology, 1990, Vol. 6, p475-81, U.K. Mudali, Localized Corrosion Behavior of 17-4 PH Stainless Steel

ASTM Spec. Tech. Publ. 1046, 1990, p515-24, S. Chatterjee, Evaluation of Ring Tensile Test Results - A Semiempirical Approach

Trans. Indian Inst. Met., 1990, Vol. 43, p31-5, A.K. Sengupta, Plutonium Uranium Nitride (Pu_0.7U_0.3)N Fuel for Fast Breeder Test Reactor - Thermal Conductivity and Chemical Compatabilty with SS 316 and Sodium

Journal of Materials Science, 1990, Vol. 25, p1640-4, M.C. Naik, Mass Transport of Cobalt and Nickel in Incoloy-800

Metallurgical Transactions A, 1990, Vol. 21A, p2897-903, K. Bhanumurthy, Solid-State Diffusion Reaction and Formation of Intermetallic Compounds in the Nickel-Zirconium System

Materials Science and Technology, 1991, Vol. 7, p8-11, A.R. Paul, Mass Transport of Iron in Incoloy-800

Physica Status Solidi A, 1991, Vol. 128, p9-19, A.R. Paul, Atomic Migration of Copper in Superalloy Incoloy-800

Journal of Materials Science Letters, 1991, Vol. 10, p64-6, B.B. Jha, Correlation of Acoustic Emission Events with Parabolic Oxidation Behavior of 2.25Cr-1Mo Steel

British Corrosion Journal, 1991, Vol. 26, p67-76, N. Parvathavarthini, Influence of Prior Deformation on the Sensitisation of AISI Type 304 Stainless Steel and Applicability of EPR Technique

Journal of Radioanalytical and Nuclear Chemistry, 1991, Vol. 148, p93-100, M.A. Mahajan, Modified Pyrohydrolysis Apparatus for the Separation of Fluorine and Chlorine Trace Impurities From Nuclear Fuel Samples for Quality Control Analysis

Materials Science and Engineering B, 1991, Vol. B10, p241-6, M. Swarnalatha, Laser-Fused Refractory Oxides for Optical Coatings

Journal of Nuclear Material, 1991, Vol. 182, p258-60, T.R.G. Kutty, Hot Hardness and Indentation Creep Studies on Titanium Modified Stainless Steel Cladding Material for Nuclear Fuel Pins

Material Science and Engineering A, 1991, Vol. A148, p299-306, A.S. Khanna, Effect of Thermal Aging on the Oxidation Behavior of 9wt%Cr-1wt%Mo Steel

International Journal of Pressure Vessels and Piping, 1991, Vol. 45, p301-26, B. Raj, Acoustic Emission Studies Towards Better Understanding of High Temperature Oxidation in Cr-Mo Steels

Journal of Nuclear Materials, 1991, Vol. 185, p208-13, K. Bhanumurthy, Reaction Diffusion in the Zirconium-Iron System

Indian Journal of Pure and Applied Physics, 1991, Vol. 29, p721-31, Y.D. Dande, Neutron Radiography at APSARA Reactor

Metallurgical Transactions A, 1991, Vol. 22A, p829-36, J.K. Chakravartty, Processing Map for Hot Working of Alpha-Zirconium

Materials Transactions, JIM, 1991 Vol. 32, p845-53, U.K. Mudali, Localized Corrosion Studies on Laser Surface Melted Type 316 Austenitic Stainless Steel

Journal of Material Science Letters, 1991, Vol. 10, p863-4, S. Ramanathan, Crystalline Growth in Thoria-10% Mol.% Yttria

Materials Transactions, 1991, Vol. 32, p1034-41, G.B. Kale, Ternary Diffusion in FCC Phase of Fe-Ni-Cr Alloy System at 1223 K

Journal of Material Science, 1991, Vol. 26, p4455-60, B.B. Jha, Acoustic Emission as a Technique to Study Breakaway Oxidation and Spalling Behavior of 2.25Cr-1Mo Steel

Oxidation of Metals, 1992, Vol. 37, p1-12, A.S. Khanna, Influence of Grain Size on the Oxidation Resistance of 21/4 Cr-1Mo Steel

British Corrosion Journal, 1992, Vol. 27, p59-65, V. Kain, Performance of AISI 304L Stainless Steel with Exposed End Grain in Intergranular Corrosion Tests

Journal of Nuclear Materials, 1992, Vol. 187, p70-3, R. Kishore, Age Hardening of Cold-Worked Zr-2.5 wt.%Nb Pressure Tube Alloy

Materials at High Temperatures, 1992, Vol. 10, p171-6, R.K.S. Raman, The Stability of Oxide Scale and Oxidation Behavior of 214Cr-1 Mo Steel During Thermal Cycling

Transactions of the Indian Institute of Metals, 1992, Vol. 45, p181-4, I.S. Batra, Laser Heat Treatment and Laser Melting of a High Speed Tool Steel

Journal of Nuclear Materials, 1992, Vol. 186, p259-68, V. Venugopal, Vapor Pressures of Uranium and Uranium Nitride over UN

Journal of Nuclear Materials, 1992, Vol. 187, p260-71, J.K. Chakravartty, Hot-Working Characteristics of Zircaloy-2 in the Temperature Range of 650-950 Degrees C

Journal of Materials Engineering and performance, 1992, Vol. 1, p341-5, U.K. Mudali, Improving Intergranular Corrosion Resistance of Sensitized Type 316 Austenitic Stainless Steel by Laser Surface Melting

Metallurgical Transactions B, 1992, Vol. 23B, p437-42, A.K. Suri, A Nitriding Process for the Recovery of Niobium from Ferroniobium

Bulletin of Materials Science, 1992, Vol. 15, p543-56, G.K. Dey, Rapid Solidification of Zirconium-Based Alloys

Corrosion, 1992, Vol. 48, p579-86, M.G. Pujar, Susceptibility of As-Welded and Thermally Aged Type 316LN Weldments Toward Pitting and Intergranular Corrosion

Zeitschrift fur Metallkunde, 1992, Vol. 83, p744-9, S.R. Dharwadkar, Determination of the Solidus, Solvus, and Liquids Temperatures for Gamma-Hardened Nickel Based Alloys

Journal of Materials Science, 1992, Vol. 27, p908-12, T.R.G. Kutty, Indentation Technique for Evaluation of Hot Hardness and Creep of SS 316 End-Plug Welds of Nuclear Fuel Pins

Scripta Metallurgica et Materialia, 1992, Vol. 27, p937-42, D.R. K. Rao, The Erosion Behavior of an Aluminum-Lithium Alloy

Corrosion Science, 1992, Vol. 33, p949-58, A.S. Khanna, The Effect of Stainless Steel Plasma Coating and Laser Treatment on the Oxidation Resistance of Mild Steel

Materials Science and Technology, 1992, Vol. 8, p1070-4, N. Parvathavarthini, Pitting Corrosion Resistance of Laser Surface Alloyed 304 Stainless Steel

Metallurgical Transactions A, 1992, Vol. 23A, p1373-5, K. Bhanumurthy, Diffusion Reaction in the Zirconium-Copper System

Journal of Materials Science, 1992, Vol. 27, p3435-41, R.K.S. Raman, Oxidation Behavior of 214Cr-1 Mo Steel With Prior Temering Treatments at 998 K for Different Durations

British Corrosion Journal, 1993, Vol. 28, p43-9, S.K. Ghosal, Film Formation and Stress Corrosion Cracking of Duplex Stainles Steel in Boiling Chloride Solution

Corrosion Science, 1993, Vol. 34, p51-60, R.S. Dutta, The Sensitization and Stress Corrosion Cracking of Nitrogen-Containing Stainless Steels

Journal of Nuclear Materials, 1993, Vol. 203, p83-82, U.K. Mudali, Corrosion Studies on Materials of Construction for Spent Nuclear Fuel Reprocessing Plant Equipment

NDT&E International, 1993, Vol. 26, p97-8, P.G. Behere, Nondestructive Technique for Identification of the Dished End of Nuclear Fuel Pellets

Materials Chemistry and Physics, 1993, Vol. 33, p165-7, B.N. Wani, Interfacial Reaction Between Ammonium Hydrogen Fluoride and Bonary Oxides at Room Temperature

Transactions of the Indian Institute of Metals, 1993, Vol. 46, p237-40, U.K. Viswanathan, Irradiation Embrittlement of Microalloyed Ferritic Steels

Journal of Nuclear Materials, 1993, Vol. 207, p169-76, G.C. Jain, Evaluation of Phases in Pu-C-O and (U,Pu)-C-O Systems by X-ray Diffractometry and Chemical Analysis

Journal of Nuclear Materials, 1993, Vol. 202, p245-51, G.C. Jain, Experimental Evaluation of Oxygen Solubility in UN, PuN and (U,Pu)N

High Temperature Materials and Processes, 1993, Vol. 25, 294-304, B.P. Sharma, Beryllium Facilities in India

Journal of Nuclear Materials, 1993, Vol. 207, p345-9, T.R.G. Kutty, Indentation Creep of Zircaloy-2 Welds of Nuclear Fuel Pins

Oxidation of Metals, 1993, Vol. 40, p21-36, R.K.S. Raman, Oxidation Behavior of 2.25Cr-1Mo Steel With Prior Tempering at Different Temperatures

Metallurgical Transactions A, 1993, Vol. 24A, p495-501, D. Srivastava, Unusual Morphology of the Omega Phase in a Zr-1.75 Atomic Percent Ni Alloy

Indian Journal of Technology, 1993, Vol. 31, p563-71, S.V. Phadnis, Influence of Alloying Additions on the Oxidation Behavior of Zircaloy-2, Zr-2.5Nb and Zr-0.5Nb-1Cr in the Temperature Range 400-1200 Degrees C

Journal of Nuclear Science and Technology, 1993, Vol. 30, p712-6, G. Govindaraj, Gas Entrainment in Surge Tank of Liquid Metal Fast Breeder Reactors

Scripta Metallurgica et Materialia, 1993, Vol. 28, p753-6, K. Bhanumurthy, Modification of Zirconium-Iron Phase Diagram

Corrosion, 1993, Vol. 49, p977-91, G.C. Palit, Electrochemical Investigations of Pitting Corrosion in Nitrogen-Bearing Type 316LN Stainless Steel

Material Research Bulletin, 1993, Vol. 28, p1193-99, R.S. Mehrotra, Vacuum Carbothermic Reduction of Uranium Dioxide Microspheres in a Static Graphite Bed

Corrosion Science, 1993, Vol. 34, p1275-88, R.K.S. Raman, The Oxidation Behavior of the Weld Metal, Heat Affected Zone and Base Metal in the Weldments of 2.25Cr-1Mo Steel

Metallurgical Transactions A, 1993, Vol. 24A, p2429-42, U.K. Viswanathan, Precipitation Hardening in 350 Grade Maraging Steel

Metallurgical Transactions A, 1993, Vol. 24A, p2653-56, U.K. Viswanathan, Dilatometric Technique for Evaluation of the Kinetics of Solid-State Transformations of Maraging Steel

Metallurgical Transactions A, 1993, Vol. 24A, p2709-19, G.K. Dey, Precipitation Hardening in Nickel-Copper Base Alloy Monel K 500

Journal of Materials Science, 1993, Vol. 28, p3089-96, M.G. Pujar, Effect of Laser Surface Melting on the Corrosion Resistance of Chromium-Plated 9Cr-1Mo Ferritic Steel in an Acidic Medium

Journal of Materials Science Letters, 1993, Vol. 12, p1879-81, K. Bhanumurthy, Reactive Diffusion Between Titanium and Stainless Steel

Journal of Nuclear Materials, 1994, Vol. 203, p73-82, U.K. Mudali, Corrosion Studies on Materials of Construction for Spent Nuclear Fuel Reprocessing Plant Equipment

British Corrosion Journal, 1994, Vol. 29, p132-5, B. Srinivasan, Corrosion of Maraging Steels in Chloride Solutions

Surface Engineering, 1994, Vol. 10, p141-6, R.K.S. Raman, Improvement of Oxidation Resistance of Metals and Alloys by High Temperature Coating and Laser Treatment

British Corrosion Journal, 1994, Vol. 29, p152-5, S. Sathiyanarayanan, Critique of Harmonic Analysis for Corrosion Rate Measurements

Journal of Nuclear Materials, 1994, Vol. 211, p244-7, S.R. Bharadwaj, Thermodynamic Properties of Zirconium and Hafnium Molybates

Journal of Materials Engineering and Performance, 1994, Vol. 3, p699-705, V. Kain, Mechanism of Improved Corrosion Resistance of Type 304L Stainless Steel, Nitric Acid Grade, in Nitric Acid Environments

Scripta Metallurgica et Materialia, 1994, Vol. 30, p1227-31, R. Tewari, Microstructural Studies on Cast Zr₃Al-3wt%Nb

International Journal of Mass Spectrometry and Ion Processes, 1994, Vol. 134, p183-90, K.L. Ramakumar, Simultaneous Isotopic Analysis of Uranium and Plutonium by Thermal Ionization Mass Spectrometry Coupled to a Variable Mutlicollection Detection System

Journal of Nuclear Materials, 1994, Vol. 217, p67-74, K. Bhanumurthy, Transition Joints Between Zircaloy-2 and Stainless Steel by Diffusion Bonding

Journal of Nuclear Materials, 1994, Vol. 217, p75-81, A.R. Paul, Lattice and Grain Boundary Diffusion of Chromium in Superalloy Incoloy-800

Journal of Nuclear Materials, 1994, Vol. 217, p294-99, S.K. Sali, Solid State Reactions of Uranium Oxide and Alkali Metal Chromates: Characterisation of New Uranates

Bulletin of Materials Science, 1994, Vol. 17, p685-98, P. Rodriguez, On the Stress Corrosion Cracking Mechanisms of Austenitic Stainless Steels

Oxidation of Metals, 1994, Vol. 42, p335-55, R.K.S. Raman, Synergistic Influence of Alloy Grain Size and Si Content on the Oxidation Behavior of 9Cr-1Mo Steel

Journal of Materials Engineering and Performance, 1994, Vol. 3, p699-705, V. Kain, Mechanism of Improved Corrosion Resistance of Type 304L Stainless Steel, Nitirc Acid Grade, in Nitric Acid Environments

Interceram, 1995, Vol. 44, p18-, P. Balakrishnan, Particle Aggregates in Powder Processing - A Review

Journal of Nuclear Materials, 1995, Vol. 223, p20-7, S. Anthonysamy, Chemical Potential of Carbon in the System U-Pu-C-O-N: Measurements and Calculations

Journal of Nuclear Materials, 1995, Vol. 224, p17-24, H.S. Khatak, Formation of NaCrO2 in Sodium Systems of Fast Reactors and its Consequence on the Carbon Potential

Journal of Nuclear Materials, 1995, Vol. 224, p25-30, R. Asuvathraman, Surface Studies on Uranium Monocarbide Using XPS and SIMS

Review of Scientific Instruments, 1995, Vol. 66, p2599-603, P.C. Sahu, Performance of a Diamond-Anvil High-Pressure X-ray Diffractometer in the Grunier Geometry

Journal of Nuclear Materials, 1995, Vol. 218, p166-73, K.D. Singh Mudher, Solid State Reactions of Uranium Oxides With Ammonium Sulphate

Journal of Nuclear Materials, 1995, Vol. 218, p231-5, G.A. Rama Rao, Measurement of Void Volume of a Fuel Rod and the Exchange of Occluded Gases From Mixed Carbide Fuel With Filling Gas Helium

Journal of Materials Science Letters, 1995, Vol. 14, p1383-5, D. Mukherjee, Interaction Between SS-302 and Zircaloy During Fuel Pin Welding

Metallurgical and Materials Transactions A, 1995, Vol. 26A, p1859-68, H.Shaikh, Effect of Ferrite Transformations on the Tensile and Stress Corrosion Properties of Type 316L Stainless Steel Weld Metal Thermally Aged at 873 K

Indian Journal of Engineering and Material Science, 1996, Vol. 3, p96-, P. Balakrishna, End-Capping and Other Defects in Pressed Ceramic Compacts

Materials Science Forum, 1997, Vol. 246, p225-38, A.K. Dua, Coatings for Reducing Plasma Contamination and Power Loss in Fusion Reactors

Indian Journal of Engineering and Material Science, 1998, Vol. 5, p136-, P. Balakrishnan, Admixed Lubricants and Binders in Ceramic Powder Compaction - A Study of Zinc Behenate Additive

Separation Science and Technology, 1998, Vol. 33, p1681-92, B.Y. Mishra, Solvent Extraction Separation of Beryllium (II) From Aluminum by Cyanex 921 (TOPO)

Journal of Nuclear Materials, 1999, Vol. 265, p146-53, S. Mudher, Solid State Reaction of CeO₂, ThO₂ and PuO₂ with Ammonium Sulphate

Journal of Nuclear Materials, 1999, Vol. 270, p301-8, R. Agarwal, Calculation of Thermodynamic Parameters of U-Pu-N System with Carbon and Oxygen Impurities